2SK1334 silicon n-channel mos fet ade-208-1271 (z) 1st. edition mar. 2001 application high speed power switching features low on-resistance high speed switching low drive current no secondary breakdown suitable for switching regulator and dc-dc converter outline 4 3 2 1 upak 1. gate 2. drain 3. source 4. drain d g s
2SK1334 2 absolute maximum ratings (ta = 25?) item symbol ratings unit drain to source voltage v dss 200 v gate to source voltage v gss ?0 v drain current i d 1a drain peak current i d(pulse) * 1 2a body to drain diode reverse drain current i dr 1a channel dissipation pch* 2 1w channel temperature tch 150 ? storage temperature tstg ?5 to +150 ? notes: 1. pw 10 ?, duty cycle 1% 2. when using the alumina ceramic board (12.5 20 0.7 mm)
2SK1334 3 electrical characteristics (ta = 25?) item symbol min typ max unit test conditions drain to source breakdown voltage v (br)dss 200 v i d = 10 ma, v gs = 0 gate to source breakdown voltage v (br)gss ?0 v i g = ?00 ?, v ds = 0 gate to source leak current i gss ?0 ? v gs = ?6 v, v ds = 0 zero gate voltage drain current i dss 50 av ds = 160 v, v gs = 0 gate to source cutoff voltage v gs(off) 2.0 4.0 v i d = 1 ma, v ds = 10 v static drain to source on state resistance r ds(on) 2.5 3.8 w i d = 0.5 a, v gs = 10 v * 1 4.5 7.0 w i d = 2 a, v gs = 10 v * 1 forward transfer admittance |yfs| 0.4 0.6 s i d = 0.5 a, v ds = 10 v * 1 input capacitance ciss 80 pf v ds = 10 v, v gs = 0, output capacitance coss 40 pf f = 1 mhz reverse transfer capacitance crss 7 pf turn-on delay time t d(on) ? ?si d = 0.5 a, v gs = 10 v, rise time t r ? ?sr l = 60 w turn-off delay time t d(off) ?0 ns fall time t f ? ?s body to drain diode forward voltage v df 1.0 v i f = 1 a, v gs = 0 body to drain diode reverse recovery time t rr 75 ns i f = 1 a, v gs = 0, di f /dt = 50 a/? notes: 1. pulse test 2. marking for 2SK1334 is ?y?
2SK1334 4 1.2 0.8 0.4 0 50 100 150 ambient temperature ta ( ? ) power vs. temperature derating channel dissipation pch (w) test condition: when using alumina ceramic board(12.5 20 0.7mm) 5 1 0.1 0.005 10 100 1,000 drain to source voltage v ds (v) drain current i d (a) maximum safe operation area 2 0.02 1 3 30 300 ta = 25? 10 m s 100 m s dc operation (t c = 25?) operation in this area is limited by r ds (on) 1 ms pw = 10 ms (1 shot) 0.2 0.5 0.05 0.01 2.0 820 drain to source voltage v ds (v) typical output characteristics 1.6 0.4 41216 pulse test 0 0.8 1.2 5 v v gs = 3 v drain current i d (a) 4 v 6 v 7 v 8 v 10 v 2.0 4 10 gate to source voltage v gs (v) drain current i d (a) typical transfer characteristics 1.6 0.4 268 ?5? 0 0.8 1.2 v ds = 10 v pulse test 75? t c = 25?
2SK1334 5 20 820 drain to source voltage v gs (v) drain to source saturation voltage v ds (on) (v) 16 4 41216 0 8 12 drain to source saturation voltage vs. gate to source voltage 1 a i d = 2 a pulse test 0.5 a 50 0.2 5 drain current i d (a) static drain to source on state resistance r ds (on) ( w ) 20 1 0.1 0.5 2 0.05 5 10 static drain to source on state resistance vs. drain current 2 0.5 1 15 v v gs = 10 v pulse test 10 40 160 case temperature t c (?) static drain to source on state resistance r ds (on) ( w ) 8 2 0 80 120 0 4 6 static drain to source on state resistance vs. temperature i d = 2 a v gs = 10 v pulse test ?0 1 a 0.5 a 5 0.2 5 drain current i d (a) forward transfer admittance ? yfs ? (s) 2 0.2 0.1 1 0.05 0.5 1 forward transfer admittance vs. drain current v ds = 10 v pulse test 0.1 0.5 2 75? ?5? t c = 25?
2SK1334 6 500 0.2 5 reverse drain current i dr (a) reverse recovery time t rr (ns) 200 20 0.05 1 5 50 100 reverse recovery time vs. reverse drain current di/dt = 50 a/ m s, ta = 25? v gs = 0 10 0.5 2 0.1 1,000 20 50 drain to source voltage v ds (v) capacitance c (pf) 10 10 30 40 typical capacitance vs. drain to source voltage 0 1 crss ciss v gs = 0 f = 1 mhz 100 coss 500 410 gate charge qg (nc) drain to source voltage v ds (v) 400 26 08 300 200 100 v dd = 150 v v ds dynamic input characteristics v gs 20 gate to source voltage v gs (v) 16 12 8 4 0 0 100 v 50 v i d = 1 a v dd = 150 v 100 v 50 v 100 0.2 5 drain current i d (a) switching time t (ns) 50 5 0.1 0.5 2 1 10 20 0.05 2 1 switching characteristics t f t d (off) t r v gs = 10 v, v dd = 30 v pw = 2 m s, duty < 1% t d (on)
2SK1334 7 2.0 2.0 source to drain voltage v sd (v) reverse dratin current i dr (a) 1.6 0.4 0.8 1.6 0 0.8 1.2 0 0.4 1.2 pulse test 10 v, 15 v v gs = 0, ? v reverse drain current vs. source to drain voltage
2SK1334 8 package dimensions 4.5 0.1 1.8 max 1.5 0.1 0.44 max 0.44 max 0.48 max 0.53 max 1.5 1.5 3.0 2.5 0.1 4.25 max 0.8 min f 1 0.4 (1.5) (2.5) (0.4) (0.2) hitachi code jedec eiaj mass (reference value) upak conforms 0.050 g as of january, 2001 unit: mm
2SK1334 9 cautions 1. hitachi neither warrants nor grants licenses of any rights of hitachi? or any third party? patent, copyright, trademark, or other intellectual property rights for information contained in this document. hitachi bears no responsibility for problems that may arise with third party? rights, including intellectual property rights, in connection with use of the information contained in this document. 2. products and product specifications may be subject to change without notice. confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. hitachi makes every attempt to ensure that its products are of high quality and reliability. however, contact hitachi? sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. design your application so that the product is used within the ranges guaranteed by hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail- safes, so that the equipment incorporating hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the hitachi product. 5. this product is not designed to be radiation resistant. 6. no one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from hitachi. 7. contact hitachi? sales office for any questions regarding this document or hitachi semiconductor products. hitachi, ltd. semiconductor & integrated circuits. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan tel: tokyo (03) 3270-2111 fax: (03) 3270-5109 copyright ? hitachi, ltd., 2000. all rights reserved. printed in japan. hitachi asia ltd. hitachi tower 16 collyer quay #20-00, singapore 049318 tel : <65>-538-6533/538-8577 fax : <65>-538-6933/538-3877 url : http://www.hitachi.com.sg url northamerica : http://semiconductor.hitachi.com/ europe : http://www.hitachi-eu.com/hel/ecg asia : http://sicapac.hitachi-asia.com japan : http://www.hitachi.co.jp/sicd/indx.htm hitachi asia ltd. (taipei branch office) 4/f, no. 167, tun hwa north road, hung-kuo building, taipei (105), taiwan tel : <886>-(2)-2718-3666 fax : <886>-(2)-2718-8180 telex : 23222 has-tp url : http://www.hitachi.com.tw hitachi asia (hong kong) ltd. group iii (electronic components) 7/f., north tower, world finance centre, harbour city, canton road tsim sha tsui, kowloon, hong kong tel : <852>-(2)-735-9218 fax : <852>-(2)-730-0281 url : http://www.hitachi.com.hk hitachi europe ltd. electronic components group. whitebrook park lower cookham road maidenhead berkshire sl6 8ya, united kingdom tel: <44> (1628) 585000 fax: <44> (1628) 585160 hitachi europe gmbh electronic components group dornacher stra b e 3 d-85622 feldkirchen, munich germany tel: <49> (89) 9 9180-0 fax: <49> (89) 9 29 30 00 hitachi semiconductor (america) inc. 179 east tasman drive, san jose,ca 95134 tel: <1> (408) 433-1990 fax: <1>(408) 433-0223 for further information write to: colophon 2.0
|
